129
Views
7
CrossRef citations to date
0
Altmetric
Original Articles

Experimental studies on pressure drop/friction factor of CNT nanofluids flowing through helical coils and development of a new empirical correlation

, &
Pages 607-617 | Received 29 Sep 2018, Accepted 14 Apr 2019, Published online: 13 May 2019
 

Abstract

This paper reports the hydrodynamic characteristics of CNT nanofluids prepared using mixed surfactant system flowing through helically coiled tubes under laminar conditions. The curvature ratio was varied from 0.036 to 0.067 and CNT concentration from 0 to 0.051 vol%. Results showed that friction factor of CNT nanofluid was higher than water for all range of parameters studied. Friction factor was found to be dependent on the volumetric concentration of CNT as well as on curvature ratio of helical coil. A maximum of 69% enhancement in friction factor was calculated with respect to water when CNT nanofluid of 0.051 vol% flowing through helical coil of curvature ratio; dt/Dc 0.067. On increasing the curvature ratio; dt/Dc from 0.036 to 0.067, friction factor increased by 46% at CNT concentration 0.051 vol%. Based on the experimental data, an empirical correlation has been proposed to evaluate friction factor of CNT nanofluids flowing through helical coils. The proposed correlation explains the present experimental data within ±11%.

GRAPHICAL ABSTRACT

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.